RXDC eXTend Wireless Radiographic

RXDC eXTend Wireless Radiographic

Contact for Price

Intraoral x-ray unit with eXTend wireless technology maximum image quality, minimum dose for the patient.

RXDC – eXTend technology provides always-sharp images, a full configuration range and the exclusive flexibility of wireless technology.

Download Brochure

Description

High-frequency, constant potential DC generator

This technology gives sharp images with greater detail and lower exposure times than would be attainable with AC X-ray units, which are characterised by variable emissions.

Moreover, constant-potential design ensures image generation is unaffected by power fluctuations. RXDC – eXTend technology is reliable for all diagnostic needs and always provides high-definition images by adapting to the sensor type.

Always-sharp images

The focal spot of just 0.4 mm is placed in the tube head in such a way as to obtain a source-to-skin gap of 30 cm (total bulk remaining equal). In this way RXDC – eXTend technology implements extensive internal collimation of the X-rays and gives an extremely small focal spot, producing ever-sharper images and ever-more precise detail.

MULTI-MODE
Automatic parameter modulation ensures the best exposure power/time selection: parameters are automatically determined on the basis of the patient’s build and the specific region of investigation. With 28 selectable sensitivity levels, sharp images are guaranteed with any sensor.

MINIMUM X-RAY DOSE
Attention to patient health is meticulous: a high frequency, constant potential generator minimises exposure times and reduces harmful radiation. Where deemed appropriate, the 4 mA mode halves the amount of X-rays. The interchangeable rectangular collimator cone (at 30 cm) further reduces the rradiated body surface area by adapting it to the effective surface area of the sensor.

SEQUENTIAL EXPOSURE
No downtimes as a result of tube overheating, not even when repeated use is required.The fast dynamic duty cycle allows, in fact, sequential exposures by keeping tube temperature under constant control on the large hand-held unit display.

Fast installation and wireless control

The efficiency of wireless technology with maximum simplicity of use.
The wireless controller frees users from the limits posed by on-machine control panels or wall-mounted controls. It is equipped with a button for ultra-fast shooting (fraction of a second) and two simple settings which make it easy to select the most suitable X-ray acquisition programme.

TECHNICAL DATA
Generator Constant potential, microprocessor-controlled
Working frequency 145 – 230 KHz with self-adjustment (typically 175 KHz)
Focal spot 0.4 mm (IEC 336)
Total filtration 2.0 mm Al @ 70 kV
Anode current 4 / 8 mA
Voltage at X-ray tube 60 / 65 / 70 kV (*)
Exposure times 0.020 – 1.000 seconds, R’10 and R’20 scale
Source-skin distance 20 and 30 cm
Irradiated field Ø 55 mm and Ø 60 mm round
Additional collimators 35 x 45 mm rectangular, 31 x 41 mm and 22 x 35 mm, for sensors size 2 and size 1
Power Supply 50/60 Hz, 115-120 V AC ±10% or 230-240 V AC ±10%
Duty Cycle Continuous operation with self-adjustment up to 1s/80s total
Arms (for Standar version only) Available in 3 lengths: 40 cm – 60 cm – 90 cm
Max. arm extension 230 cm, from wall
Certification CE 0051, FDA approved
Versions Standard (wall mounted) or Mobile (on portable cart)